BNMO-4FXO: 4 Port FXO
BNMO-4FXS: 4 Port FXS
BNMO-2HYB: 2 Port BRI/S0 / 2 FXS
BNMO-4BRI: 4 Port BRI/S0 with HPC
BNMO-1E1: 1 Port PRI E1 with High Precision Clock
BNMO-2E1: 2 Port PRI E1 with High Precision Clock
BNMO-1PRI: 1 Port PRI T1/E1 with High Precision Clock
BNMO-2PRI: 2 Port PRI T1/E1 with High Precision Clock
E1 Cross-Over Cable (BF1E1Cross)
The beroNet E1 Cross-Over Cable (BF1E1Cross) is a about 1.8m E1/T1 “cross-over” cable. The Cable uses the 1,2,4,5 Pinout. It is very useful in every E1/T1 interconnect scenario.
The beroNet T-Adapter (BFTAdapter)
The beroNet T-Adapter divides the external RJ45 Ports of the berofix Baseboard into 2 RJ45 Ports indicated by “A” and “B”. In order to use a berofix with 8 BRI Ports you need 4 beroNet T-Adapters to access all 8 BRI Ports.
Small LTE Antenna (BFANTLTES)
Small 17 cm LTE antenna for beroNet LTE Modules. It allows the reception of a LTE signal.
LTE Antenna with cable (BFANTLTE)
LTE antenna with magnetic foot for beroNet VoIP SBC LTE. It comes with a 2,5m long cable and empowers a frictionless LTE reception.
19” Rack Bracket for 2 beroNet gateway Boxes (BF19BracketDBL)
19″ bracket for 2 beroNet Gateways on 1U for the installation in server racks. The package contains: 2 parts for the outside as well as one middle piece for the connection of the 2 Gateways.
19″ Rack Bracket for the Appliance (BNTA19Bracket)
The 19” brackets made from high-quality aluminum have been created specifically for the beroNet Telephony Appliance. They assure the easy and safe mounting into server cabinets
Bridge (BFBridge)
The beroNet Bridge is used to access all 4 PSTN Ports (i.e. from a 4S0, 4FXS, 4FXO or 2S02FXS module) over the external 4 RJ45 Ports of the beroNet Baseboard. By default only 2 RJ45 are assigned for one module, which makes the use of the BFTAdapters necessary. By using the Bridge no T-Adapter is necessary.
19″ Rack Bracket (BF19Bracket)
The 19” brackets made from high quality aluminum have been created specifically for beroNet VoIP Gateways. They assure the easy and safe mounting into server cabinets.
RJ45 to RJ11 Cable (BFFXXCable)
The RJ45 to RJ11 cable allows the utilisation of all analog Modules used in the beroNet Gateways.
RJ45 to TAE Cable (BFTAEAdapter)
The RJ45 to TAE cable connects RJ45 (male) to TAE (female). It can be used with all beroNet VoIP Gateways with analog modules (especially for Germany).
PCM Cable (BFPCM)
19″ bracket for 2 beroNet Gateways on 1U for the installation in server racks. The package contains: 2 parts for the outside as well as one middle piece for the connection of the 2 Gateways.